TN floor-level cold room 242X226cm h308cm at a special price, it is a cold room made of new second choice male/female panels with metal carpentry closure and new 90X200cm buffer door. the offer includes everything needed for assembling the cold room: panels, rivets, profiles, etc. dimensions: 242X226cm h308cm, int. dim. 226X210cm h300cm, int. area 4.74m², int. volume 14.23m³, panel thickness 8cm, door light 90X200cm thickness 7cm. - 8 new second choice perimeter panels 112X300cm thickness 8cm - 2 new second choice ceiling panels 112X300cm thickness 8cm - 1 TN door with 90X200cm light, 7cm thick (opening side to be defined at purchase, can be mounted anywhere on the perimeter) - 3 300cm U-shaped perimeter rods, 6-8cm thick, in white painted sheet metal - 6 internal L-shaped profiles with rounded corners in PVC and AL in 400cm rods - 8 external L-shaped profiles in white painted sheet metal - 1 kit of 4 edges for internal rounded corners in PVC - 1 TN compensation valve for cold storage up to 40m³ - 250 white aluminium rivets - 2 white silicone cartridges of acetic sealant - 2 disposable polyurethane cartridges with 750ml dispenser - 15 pressure caps with quick fastening ATTENTION!!! nothing is pre-assembled or cut. door hole and pre-assembly, hole for monoblock, cutting of fins, etc. are all optional to be requested at the time of ordering. the offer does not include the refrigeration system, which can be purchased new: or used for €1050.00 if available at the time of purchase. the cost of assembling the monobloc is €150.00, while for the split group it is approximately €450.00.